Firmware
101

Learn about the importance of your camera's firmware, and understand the benefits of keeping it up to date. Learn About Firmware.

Self
Support

PENTAX offers an online library of self support articles for any issue you might be troubleshooting on your own. Search Self Support.

 

Downloads
& Literature

This section allows you to easily view, print and download additional information about your product: select literature and product manuals.

DigiBino (DB-100)

Change Product

Manuals

Software

USB Drivers for Windows 98 for DigiBino (DB-100)

These instructions will guide you through the process of installing the USB drivers for your Pentax DigiBino (DB-100) on a Windows 98 computer. Please note, there is no need to install drivers on Windows ME/2000/XP or MacOS computers, since these operating systems can already connect with the camera automatically.

 

The download file db.exe is a self-extracting archive file which contains the drivers. You will need to download the file to your computer, then unzip it to access the driver files. Please see the step-by-step instructions below for specifics.

Download Instructions:

  1. UNZIP YOUR DB.EXE FILE
  2. Download/save the db.exe file to your computer's hard drive.
  3. Once you have the db.exe file on your computer, you must double click it. Click UNZIP to unzip it to c:pentaxdb.
  4. Now, you will have a new folder on your c: drive called pentaxdb which contains the drivers. You are now ready to install them.

 

Installation Instructions:

  1. Connect your DigiBino to the computer with the USB cable. There is no need to turn your DigiBino camera on. When you have the DigiBino properly connected to the computer the LED light by the right eyepiece will light up indicating activity.
  2. Your computer will automatically detect the DigiBino as new hardware, and start a New Hardware Wizard to help you find the needed drivers. Click NEXT to begin.
  3. Place the selection dot is by the Wizard's recommended option if it is not already there. Click NEXT.
  4. Place a checkmark by Specify a location: and type c:pentaxdb without the quotes into the location field. This will instruct the Wizard to look for the driver files in the location to which you unzipped them earlier. Click NEXT.
  5. The Wizard will do a quick search and tell you that it has found the needed drivers.
  6. Click NEXT.
  7. Now, the Wizard will complete the installation.
  8. Click FINISH.

You're done! You can now find your DigiBino as a removable disk drive in the My Computer window.

 

 

PENTAX is a registered trademark of Pentax Imaging Corporation

DigiBino and DB-100 are trademarks of Pentax Imaging Corporation

All other product names and company names are trademarks or registered trademarks.

  • USB Drivers for Windows 98 for DigiBino (DB-100) Download